|
|
|
All articles are in .pdf format and must be viewed using Adobe Acrobat Reader. Click "Get Acrobat Reader" to get a copy. Remember that your browser (e.g. Netscape) must also have its preferences configured to use Acrobat to view .pdf files.
"Implementation of Program Assessment in a Technical Department" (Volume 21-2, April 2005)
Dr. Richard Boserand Dr. Kenneth Stier
"Outcomes Assessment Across Multiple Accreditation Agencies" (Volume 20-4, November 2004)
Dr. Jon M. Duff
"Using the Internet for an Accreditation Self-Study Portfolio" (Volume 21-1, January 2005)
Dr. Timothy R. Obermier
"When the Accreditation Board Says "NO": A Chronicle of the Reaccreditation Process (Non-Refereed Article)" (Volume 20-1, November 2003)
Mr. James L. Toppen
"The Development and Delivery of a Distance Learning (DL) Course in Industrial Technology" (Volume 16-3, June, 2000)
Dr. James E. Smallwood & Dr. Ahmad Zargari
"Distance Education at Bowling Green State University: Challenge, Opportunities and Promise" (Volume 22-4, October 2006)
Dr. Paul Cesarini, Dr. John W. Sinn and Mr. Terence Armentano
"Distance Learning: Issues and Concerns of Distance Learners" (Volume 17-3, May, 2001)
Dr. Edie K. Schmidt & Ms. Ana Gallegos
"Effective Assessment: A Model for Industrial Technology Programs" (Volume 19-3, May 2003)
Dr. Shawn D. Strong, Dr. Scott J. Amos and Dr. Neal R. Callahan
"Enhancing a Residential Safety Course with the Development of an Online Component: A Limited Case Study" (Volume 16-4, September, 2000)
Dr. Steven A. Freeman & Dr. Karla M. Embleton
"The Evolution of Student Internships in Industry" (Volume 16-4, August, 2000)
Dr. Cyndi A. Crother
"An Examination of the Graduation Rates and Enrollment Trends in Industrial Technology Baccalaureate Programs from 1988-1998" (Volume 17-3, May, 2001)
Dr. Tao C. Chang & Dr. John C. Dugger
"Experiment to Determine Feasibility of Electronic Co-op Supervision: BGSU Case Study (Non-Refereed Article)" (Volume 20-1, November 2003)
Dr. John W. Sinn
"An Experimental Study of the Impact of Training on Faculty Concerns" (Volume 21-1, January 2005)
Dr. Rita L. Dobbs
"An Exploratory Study to Identify a Common Managerial/Professional Core Curriculum for NAIT Baccalaureate Programs" (Volume 24-2, May 2008)
Dr. Ron Meier and Dr. Dan Brown
"Focus on Industry for Success" (Volume 16-3, May, 2000)
Dr. John A. Marshall
"The Future History of Industrial Technology" (Volume 20-1, November 2003)
Dr. Gordon Minty
"Gender Equity in Industrial Technology: The Challenge and Recommendations" (Volume 16-4, September, 2000)
Dr. Balsy Kasi & Dr. John C. Dugger
"Historical Changes to the NAIT Student Division: An Extreme Makeover (2001-2004)- Non-Refereed Article" (Volume 22-1, January 2006)
Dr. John Wright, Jr. and Dr. Haig Vahradian
"Implementation of Program Assessment in a Technical Department" (Volume 21-2, April 2005)
Dr. Richard Boserand Dr. Kenneth Stier
"The Importance of Student Organizations" (Volume 19-4, August 2003)
Dr. James R. Owens
"Improving the Knowledge Transfer Skills of Industrial Technology Students" (Volume 22-2, April 2006)
Dr. Kevin L. Devine
"Industrial Advisory Committee....or Action Committee?" (Volume 16-3, May, 2000)
Dr. James E. Folkestad & Dr. Michael A. DeMiranda
"Industrial Technology Program Enhancement: The Importance of Strategic Planning" (Volume 21-4, October 2005)
Dr. Dan C. Brown and Dr. Ron Meier
"The Influence of Manufacturing Facility Demographics on Manufacturing Competencies in North Carolina (Non-Refereed Article)" (Volume 20-1, November 2003)
Mr. Richard Temple
"Integrating Computer and Technology Systems Networks in Industrial Technology Programs (Non-Refereed Article)" (Volume 20-2, March 2004)
Mr. Awa Uma
"Internet and Network Security" (Volume 17-1, November, 2000)
Dr. James H. Yu & Mr. Tom K. Le
"Issues in Information Ethics and Educational Policies for the Coming Age" (Volume 15-4, August, 1999)
Dr. Chien-Pen Chuang & Dr. Joseph C. Chen
"Key Characteristics of Industrial Technology Faculty: A National Survey of NAIT Accredited IT Programs"(Volume 15-2, March, 1999)
Dr. Ahmad Zargari, CSIT & Dr. Charles E. Coddington
"Maximizing Your Industrial Advisory Potential"(Volume 15-2, March, 1999)
Dr. John Allen Marshall
"A Method for Evaluating Expert System Shells for Classroom Instruction" (Volume 19-1, November 2002)
Dr. MD Salim, Mr. Alvaro Villavicencio, & Dr. Marc A. Timmerman
"A Model Curriculum for Computer Aided Design (CAD) Associate Degree Programs" (Volume 20-2, April 2004)
Dr. Xin-Ran Duan
"NAIT Demographics Study - 1997"(Volume 15-2, March, 1999)
Dr. Athula Kulatunga, Dr. Randall Shaw & Dr. Mark Nelson
"A National Benchmark Study of Computer Technology-related Programs in Industrial Technology" (Volume 20-4, September 2004)
Dr. Dan Brown, Dr. Rodney L. Custer & Dr. Klaus Schmidt
"Outcomes Assessment Across Multiple Accreditation Agencies" (Volume 20-4, November 2004)
Dr. Jon M. Duff
"Professional Internships as a Requirement for Graduation" (Volume 15-3, May, 1999)
Dr. John Allen Marshall
"Proposal for Taking the Profession to the Next Level: Assessing Core Knowledge Through Online Methods" (Volume 17-1, November, 2000)
Dr. John W. Sinn
"Quality Measurement and Good Practices in Web-Based Distance Learning: A Case Study of the Industrial Management Program at Central Missouri State University" (Volume 20-4, December 2004)
Dr. Ronald Woolsey & Ms. Suhansa Rodchua
"A Reading List for Establishing a Base of Knowledge for Technology Management: A Delphi Study" (Volume 19-2, March 2003)
Dr. Jeff McNabb
"Reducing Student Writing Time and Instructor Grading Time of Laboratory Reports" (Volume 22-3, September 2006)
Dr. David Hoffa and Dr. Steven Freeman
"The Status of Industrial Interaction/Outreach in Industrial Technology" (Volume 19-1, December 2002)
Dr. Randall Shaw & Dr. Craig Downing
"The Status of NAIT: Perceptions of Industrial Technology Department Chairs" (Volume 16-3, May, 2000)
Dr. Mark R. Miller
"A Study of Computer-Mediated Communication to be Used for Classroom Instruction" (Volume 15-3, May, 1999)
Dr. Cynthia C. Gillispie
"A Technology Systems Course: An Essential Component of General Education Curriculum"
Dr. Ahmad Zargari & Dr. Charles Patrick (Volume 15-1, November, 1998)
"Telecommunication Systems Program Evaluation: A Survey of TCS Alumni on the Curriculum" (Non-Refereed) (Volume 21-3, July 2005)
Dr. H. Naik Dharavath and Dr. Steve Schlough
"Transforming Leadership in the Manufacturing Industry" (Volume 17-2, April, 2001)
Dr. Jule D. Scarborough
"Transforming Leadership: An Assessment Tool" (Volume 18-2, February 2002)
Dr. Jule Dee Scarborough
"Translating CCAF AAS Degree Programs" (Volume 23-2, June 2007)
Dr. Robert A. Chin
"An Update on Applied Quality Science at Bowling Green State University and the Instructional Use of Student-Based Applied Research as a Technology Transfer Mechanism: A Critical Element of Education for Technologists"
Mr. Darren Olson & Dr. John Sinn (Volume 15-4, September, 1999)
"Using Peer Assessments in Team Activities" (Volume 20-1, November 2003)
Dr. Steven A. Freeman and Dr. Michael J. Dyrenfurth
"Using the Internet for an Accreditation Self-Study Portfolio" (Volume 21-1, January 2005)
Dr. Timothy R. Obermier
"The Web-Enhanced Classroom" (Volume 18-2, February 2002)
Dr. Klaus Schmidt
"What Influences Students to Attend Four-Year Automotive Programs"> (Volume 15-3, June, 1999)
Dr. Robert L. Frisbee & Dr. Greg Belcher
"When the Accreditation Board Says "NO": A Chronicle of the Reaccreditation Process (Non-Refereed Article)" (Volume 20-1, November 2003)
Mr. James L. Toppen
"A Preliminary Manufacturing Competencies Study of Small and Medium-Sized Manufacturers in Illinois" (Volume 22-2, April 2006)
Dr. Kenneth W. Stier
"Telecommunication Systems Program Evaluation: A Survey of TCS Alumni on the Curriculum" (Non-Refereed) (Volume 21-3, July 2005)
Dr. H. Naik Dharavath and Dr. Steve Schlough
"A Pilot Study for Integrating Virtual Reality into an Introductory Design and Graphics Course" (Volume 20-4, November 2004)
Dr. Shana S-F Smith & Ms. Shu-Ling Lee
"An Integrated Framework for Assembly-Oriented Product Design and Optimization" (Volume 19-2, March 2003)
Dr. Qiang Su and Dr. Shana Shiang-Fong Smith
"Integrating Rapid Prototyping Technology into the Curriculum" (Volume 17-1, December, 2000)
Dr. Kenneth Stier & Dr. Ryan Brown
"Integrating the Thinking Process into the Product Design Chain" (Volume 18-2, February 2002)
Mr. Chang Lin Yang, Dr. Tsung Shin Hsu & Dr. Chung Yaw Ching
"Integration of Product and Process Development Using Rapid Prototyping and Workcell Simulation Technologies"
Dr. Daniel Chen and Dr. Frank Cheng (Volume 16-1, November, 1999)
"A Management-Support Technique for the Selection of Rapid Prototyping Technologies"
Dr. Marcello Braglia & Dr. Alberto Petroni (Volume 15-4, September, 1999)
"A Model Curriculum for Computer Aided Design (CAD) Associate Degree Programs" (Volume 20-2, April 2004)
Dr. Xin-Ran Duan
"The Relevance of Concurrent Engineering in Industrial Technology Programs" (Volume 16-3, May 2000)
Dr. Rada Balamuralikrishna, Dr. Ragu Athinarayanan & Dr. Xueshu Song
"Resolving the Conflict between Design and Manufacturing: Integrated Rapid Prototyping and Rapid Tooling (IRPRT)" (Volume 17-4, August 2001)
Dr. James E. Folkestad & Dr. Russell L. Johnson
"Selecting Rapid Prototyping Systems" (Volume 18-1, December 2001)
Dr. Ryan Brown and Dr. Kenneth W. Stier
"Spatial Visualization: Fundamentals and Trends in Engineering Graphics" (Volume 18-1, December 2001)
Dr. Shawn Strong and Dr. Roger Smith
"Teaching Design for Manufacturability with Desktop Computer-Aided Analysis" (Volume 16-3, May 2000)
Dr. Louis Reifschneider
"Teaching Kinematic Synthesis of Linkages without Complex Mathematics" (Volume 21-4, October 2005)
Dr. Louis G. Refischneider
"Technological Applications of Solid Modeling and Parametric Features" (Volume 15-3, May 1999)
Dr. Earnest L. Walker & Mr. Bruce Cox
"Technology and Practice in a Historical Context: Building the Civil War Submarine 'Pioneer' (Non-Refereed Article)" (Volume 21-1, January 2005)
Dr. Roy Bonnette
"Web-Centric Product Data Management" (Volume 18-1, November 2001)
Dr. David S. Kelly
"Assessing the Professional Development Needs of NAIT's Industry Division Members" (Volume 20-2, March 2004)
Mr. Bruce DeRuntz and Dr. Ronald Meier
"An Exploratory Study to Identify a Common Managerial/Professional Core Curriculum for NAIT Baccalaureate Programs" (Volume 24-2, May 2008)
Dr. Ron Meier and Dr. Dan Brown
"A Preliminary Manufacturing Competencies Study of Small and Medium-Sized Manufacturers in Illinois" (Volume 22-2, April 2006)
Dr. Kenneth W. Stier
"A Relational Study of Wisconsin's Water Quality Operator Certification Program" (Volume 21-1, February 2005)
Mr. Fred S. Rice
"The Application of Artificial Networks to Monitoring and Control of an Induction Hardening Process" (Volume 16-1, January, 2000)
Mr. Timothy Stich, Dr. Julie K. Spoerre and Dr. Tomas Velasco
"The Application of
Multi-Level Genetic Algorithms in Assembly Planning" (Volume 17-4, August, 2001)
Dr. Shiang-Fong Chen and Mr. Yong-Jin Liu
"Controlling Robot Through Internet Using Java" (Volume 20-3, June 2004)
Mr. Ravindra Thamma, Dr. Luke H. Huang, Dr. Shi-Jer Lou and Dr. C. Ray Diez
"Development of an Accelerometer-Based Surface Roughness Prediction System in Turning Operations Using Multiple Regression Techniques" (Volume 20-4, November 2004)
Mr. E. Daniel Kirby, Ms. Zhe Zhang & Dr. Joseph C. Chen
"ERP: The Primary Solution Provider for Industrial Companies" (Volume 17-3, May, 2001)
Dr. Ali E. Kashef, Dr. Mahyar Izadi & Dr. Saud H. Al-Sehali
"The House of Competitiveness: The Marriage of Agile Manufacturing, Design for Six Sigma, and Lean Manufacturing with Quality Considerations" (Volume 21-3, July 2005)
Ms. Jami Kovach, Ms. Paris Stringfellow, Ms. Jennifer Turner and Dr. B. Rae Cho
"Improving the Knowledge Transfer Skills of Industrial Technology Students" (Volume 22-2, April 2006)
Dr. Kevin L. Devine
"An Integrated Framework for Assembly-Oriented Product Design and Optimization" (Volume 19-2, March 2003)
Dr. Qiang Su and Dr. Shana Shiang-Fong Smith
"Local Area Network (LAN) in Manufacturing"
Dr. Massoud Maxwell Rabiee (Volume 15-2, February, 1999)
"A Management-Support Technique for the Selection of Rapid Prototyping Technologies"
Dr. Marcello Braglia & Dr. Alberto Petroni (Volume 15-4, September, 1999)
"Mass-Customization Methodology for an Apparel Industry with a Future"
Dr. Joseph C. Chen and Ms. Seung-Eun Lee (Volume 16-1, December, 1999)
"A Multiple Regression Model to Predict In-process Surface Roughness in Turning Operation Via Accelerometer" (Volume 17-2, February, 2001)
Mr. Luke Huang & Dr. Joseph C. Chen
"Neural Network-Based Tool Breakage Monitoring System for End Milling Operations" (Volume 16-2, March, 2000)
Mr. Po-Tsang Huang & Dr. Joseph C. Chen
"The Relevance of Concurrent Engineering in Industrial Technology Programs" (Volume 16-3, May, 2000)
Dr. Rada Balamuralikrishna, Dr. Ragu Athinarayanan & Dr. Xueshu Song
"A Systematic Approach for Identifying Optimum Surface Roughness Performance in End-Milling Operations" (Volume 17-2, March, 2001)
Dr. John L. Yang & Dr. Joseph C. Chen
"A Systematic Procedure for Designing State Combination Circuits in PLCs" (Volume 15-3, May, 1999)
Dr. Chien-Pen Chuang, Ms. Xing Lan, & Dr. Joseph C. Chen
"Testing a New Curriculum for Design for Manufacturability (DFM) in Technical Education" (Volume 20-4, November 2004)
Dr. Bernie P. Huang, Dr. Jacob Chen & Dr. Joseph C. Chen
"The Application of Artificial Networks to Monitoring and Control of an Induction Hardening Process" (Volume 16-1, January, 2000)
Mr. Timothy Stich, Dr. Julie K. Spoerre and Dr. Tomas Velasco
"Cryptography Decrypted - Book Review" (Volume 18-2, February 2002)
David A. Rosenthal, MPA
"The Debate Over Which PLC Programming Lanquage is the State-of-the-Art" (Volume 15-4, August, 1999)
Dr. John R. Wright, Jr.
"Implementation of Multilevel Inverter-Fed Induction Motor Drive" (Volume 24-2, April 2008)
Mr. G. Pandian and Dr. S. Rama Reddy
"Journey to a Flexible, Reliable Laboratory Platform for Simultaneous Control of Multiple Reactive Power Devices" (Volume 23-2, June 2007)
Mr. Jason Foster
"A LabView-Based Instrumentation System for a Wind-Solar Hybrid Power Station" (Volume 20-3, July 2004)
Dr. Recayi Pecen, Dr. MD Salim & Mr. Ayhan Zora
"Local Area Network (LAN) in Manufacturing"
Dr. Massoud Maxwell Rabiee (Volume 15-2, February, 1999)
"A Method for Evaluating Expert System Shells for Classroom Instruction" (Volume 19-1, November 2002)
Dr. MD Salim, Mr. Alvaro Villavicencio, & Dr. Marc A. Timmerman
"A National Benchmark Study of Computer Technology-related Programs in Industrial Technology" (Volume 20-4, September 2004)
Dr. Dan Brown, Dr. Rodney L. Custer & Dr. Klaus Schmidt
"Neural Network-Based Tool Breakage Monitoring System for End Milling Operations" (Volume 16-2, March, 2000)
Mr. Po-Tsang Huang & Dr. Joseph C. Chen
"A Progress Report on Y2K"
Dr. Kenneth W. Hollman, Dr. Emily J. Norman Zietz & Dr. Robert G. Colvard (Volume 15-2, March, 1999)
"A Systematic Procedure for Designing State Combination Circuits in PLCs" (Volume 15-3, May, 1999)
Dr. Chien-Pen Chuang, Ms. Xing Lan, & Dr. Joseph C. Chen
"The Use of PIC Microcontrollers in Multiple DC Motors Control Applications" (Volume 23-3, July 2007)
Dr. Steve C. Hsiung
"WebDAV: A Web-Writing Protocol and More" (Volume 20-2, March 2004)
Ms. Mary Ellen O'Shields and Dr. Philip J. Lunsford II
"Artificial Intelligence and the Internet: An Integral Part of the Factory of the Future" (Volume 18-2, February 2002)
Ms. Marla P. Rogers
"Challenges Ahead for Adobe's Portable Document Format" (Volume 21-2, April 2005)
Dr. Paul Cesarini and Mr. Jason Mellen
"Computer Management Information Systems and Computer Production Skills Needed by Industrial Technology Graduates as Perceived by Universities and Companies" (Volume 17-1, December, 2000)
Dr. Ivan T. Mosley, Sr.
"Cryptography Decrypted - Book Review" (Volume 18-2, February 2002)
David A. Rosenthal, MPA
"High School Students' Perceptions of Information Technology Skills and Careers" (Volume 16-4, September, 2000)
Dr. Uma A. Gupta & Dr. Lynne E. Houtz
"Implementing IP Services at the Network Edge - Book Review" (Volume 18-3, May 2002)
Mr. David A. Rosenthal, MPA
"Journey to a Flexible, Reliable Laboratory Platform for Simultaneous Control of Multiple Reactive Power Devices" (Volume 23-2, June 2007)
Mr. Jason Foster
"Neural Network-Based Tool Breakage Monitoring System for End Milling Operations" (Volume 16-2, March, 2000)
Mr. Po-Tsang Huang & Dr. Joseph C. Chen
"Reality-Based Construction Project Management: A Constraint-Based 4D Simulation Environment" (Volume 23-1, January 2007)
Dr. Borinara Park & Dr. Ronald Meier
"A Study of Magneto-Resistive Read-Write Head Reliability Using Low-Frequency Noise Measurement Technique" (Volume 22-4, October 2006)
Dr. Kuldeep S. Rawat and Dr. Gholam H. Massiha
"Surface Mount Technology Market Forecasting" (Volume 17-1, December, 2000)
Dr. Shelton Houston
"WebDAV: A Web-Writing Protocol and More" (Volume 20-2, March 2004)
Ms. Mary Ellen O'Shields and Dr. Philip J. Lunsford II
"A BCS Framework for Air Cargo Terminal Design: Procedure and Case Study" (Volume 22-1, March 2006)
Mr. Chih-Hsien Chen and Dr. Shuo-Yan Chou
"Comparative Analysis between Manufacturing and Construction Enterprises on the Use of Formalized Quality Programs" (Volume 22-3, September 2006)
Dr. Steven W. McCrary, Mr. Rathel R. Smith and Dr. R. Neal Callahan
"Construction Careers Connection" (Volume 19-3, July 2003)
Mr. John W. Searles and Dr. James R. Owens
"Reality-Based Construction Project Management: A Constraint-Based 4D Simulation Environment" (Volume 23-1, January 2007)
Dr. Borinara Park & Dr. Ronald Meier
"Recycled Foam and Cement Composites in Insulating Concrete Forms" (Volume 18-3, May 2002)
Dr. Richard Boser, Mr. Tory Ragsdale, and Dr. Charles Duvel
"Service-Learning in an Introductory Course in Construction Management" (Volume 23-2, April 2007)
Dr. Steven W. McCrary, Dr. Dane Paterson & Dr. Shawn Strong
"Tensile Strength Comparison of Athletic Tapes: Assessed Using ASTM D3759M-96, Standard Test Method for Tensile Strength and Elongation of Pressure-Sensitive Tapes"
Dr. Steven L. Schaeffer, Ms. Jill Slusarski, Ms. Valeria VanTiem, and Dr. M.L. Johnson (Volume 16-1, November, 1999)
"Validation of Project Time Decision-Support Tools and Processes" (Volume 23-2, April 2007)
Dr. Steven W. McCrary, Mr. David Leslie, Dr. Freddy L. Roberts & Dr. Melvin R. Corley
"An Analysis of Industrial Technology (IT) Programs in Meeting Students Needs: A Survey of IT Alumni"
Dr. Ahmad Zargari & Mr. Robert Hayes (Volume 15-4, September, 1999)
"Analysis of the Industrial Technology Electrical Systems Specialization Using DACUM" (Volume 15-4, August, 1999)
Dr. Deborah J. Zanella
"Assessing Individual Student Performance in Teams" (Volume 16-3, May, 2000)
Dr. James E. Ettaro
"Attitude of Electronics Technology Majors at Indiana State University Toward Mathematics"
Dr. William E. Croft (Volume 16-2, March, 2000)
"Benefits of a Cross-Functional Safety Curriculum" (Volume 15-4, August, 1999)
Dr. Steven A. Freeman & Dr. Dennis W. Field
"A Case Study of How to Incorporate Cross-Functional Components in Industrial Technology Education: Safety Metrics in the Classroom" (Volume 21-2, April 2005)
Dr. John E. De Leon
"A Comparison of the Effectiveness of Applied and Traditional Mathematics Curriculum"
Dr. Stanley L. Lightner (Volume 15-2, March, 1999)
"A Comparison of Selected Categories of Accreditation Standards of NAIT, ABET and AACSB" (Volume 18-3, June 2002)
Dr. C. Douglas Ward & Dr. John Dugger
"Competencies Identified as Important for 21st Century Plastering Contractors - A Rotational Delphi"
Dr. Joseph Scarcella & Dr. Rodney L. Custer (Volume 15-1, November, 1998)
"Computer Knowledge Report from a Student Self-Evaluation" (Volume 20-1, December 2003)
Dr. Charles Duvel and Dr. Sharon Pate
"Computer Management Information Systems and Computer Production Skills Needed by Industrial Technology Graduates as Perceived by Universities and Companies" (Volume 17-1, December, 2000)
Dr. Ivan T. Mosley, Sr.
"Construction Careers Connection" (Volume 19-3, July 2003)
Mr. John W. Searles and Dr. James R. Owens
"A Cross-Disciplinary Biotechnology Initiative: A New Frontier for Industrial Technology (Non-Refereed Article)" (Volume 21-2, April 2005)
Dr. Matthew P. Stephens and Dr. Niaz Latif
"Digitization and Graphic Communication Education: From Print Reproduction to Dynamic Image Generation"
Ms. Ute Sartorius (Volume 16-2, March, 2000)
"Does Rapid Prototyping Improve Student Visualization Skills?" (Volume 16-4, September, 2000)
Dr. Gary Frey & Dr. David Baird
"Energy and Power Technology: A Perspective for the 21st Century" (Volume 19-4, August 2003)
Dr. Bruce Marsh
"Enhancing Entry Level Skills in Quality Assurance: An Industry Perspective" (Volume 20-4, September 2004)
Dr. R. Neal Callahan, Dr. Scott J. Amos & Dr. Shawn D. Strong
"Enhancing a Residential Safety Course with the Development of an Online Component: A Limited Case Study" (Volume 16-4, September, 2000)
Dr. Steven A. Freeman & Dr. Karla M. Embleton
"The Evolution of Student Internships in Industry" (Volume 16-4, August, 2000)
Dr. Cyndi A. Crother
"Experiment to Determine Feasibility of Electronic Co-op Supervision: BGSU Case Study (Non-Refereed Article)" (Volume 20-1, November 2003)
Dr. John W. Sinn
"An Exploratory Study to Assess Competency Gaps in Science, Mathematics, Engineering, and Technological (SMET) Education"
Dr. Ronald Meier, Dr. Michael Williams, Dr. Michael Humphreys, & Mr. John Centko (Volume 15-3, June, 1999)
"An Exploratory Study to Identify a Common Managerial/Professional Core Curriculum for NAIT Baccalaureate Programs" (Volume 24-2, May 2008)
Dr. Ron Meier and Dr. Dan Brown
"Focus on Industry for Success" (Volume 16-3, May, 2000)
Dr. John A. Marshall
"The Future History of Industrial Technology" (Volume 20-1, November 2003)
Dr. Gordon Minty
"Graphic Communications Management Program Assessment: A Survey of GCM Alumni on the Curriculum" (Volume 20-3, June 2004)
Dr. Ted Bensen and Dr. H. Naik Dharavath
"High School Students' Perceptions of Information Technology Skills and Careers" (Volume 16-4, September, 2000)
Dr. Uma A. Gupta & Dr. Lynne E. Houtz
"Impact of Screen-Capture Based Instruction on Student Comprehension of Computer Aided Design (CAD) Software Principles" (Volume 18-1, December, 2001)
Dr. James E. Folkestad & Dr. Michael A. De Miranda
"Implementation of Program Assessment in a Technical Department" (Volume 21-2, April 2005)
Dr. Richard Boserand Dr. Kenneth Stier
"Importance of Technical Competencies in the Graphic Communications Technology Curriculum as Perceived by the Graphic Communications Industry and Educators" (Volume 19-2, March 2003)
Dr. H. Naik Dharavath
"The Importance of TQM Concepts and Instruction as Perceived by Industrial and Vocational Training Personnel"
Dr. Hsi-Kong Chin Wang and Dr. William G. Miller (Volume 16-1, November, 1999)
"Industrial Advisory Committee....or Action Committee?" (Volume 16-3, May, 2000)
Dr. James E. Folkestad & Dr. Michael A. DeMiranda
"An Industrial Technologist's Core Knowledge: Web-based Strategy for Defining our Discipline" (Volume 17-2, February, 2001)
Dr. John W. Sinn & Mr. Darren Olson
"The Influence of Manufacturing Facility Demographics on Manufacturing Competencies in North Carolina (Non-Refereed Article)" (Volume 20-1, November 2003)
Mr. Richard Temple
"Integrating Computer and Technology Systems Networks in Industrial Technology Programs (Non-Refereed Article)" (Volume 20-2, March 2004)
Mr. Awa Uma
"Integrating Enterprise-Wide Risk Management Concepts into Industrial Technology Curricula" (Volume 16-4, September, 2000)
Dr. Ronald L. Meier
"Integrating Rapid Prototyping Technology into the Curriculum" (Volume 17-1, December, 2000)
Dr. Kenneth Stier & Dr. Ryan Brown
"Integrating Spreadsheet Templates and Data Analysis into Fluid Power Instruction" (Volume 16-4, August, 2000)
Dr. Bruce Marsh
"Issues in Information Ethics and Educational Policies for the Coming Age" (Volume 15-4, August, 1999)
Dr. Chien-Pen Chuang & Dr. Joseph C. Chen
"Linking TQM Culture to Traditional Learning Theories" (Volume 21-4, October 2005)
Dr. George R. Maughan and Ms. Tracey Anderson
"A Model Curriculum for Computer Aided Design (CAD) Associate Degree Programs" (Volume 20-2, April 2004)
Dr. Xin-Ran Duan
"A National Benchmark Study of Computer Technology-related Programs in Industrial Technology" (Volume 20-4, September 2004)
Dr. Dan Brown, Dr. Rodney L. Custer & Dr. Klaus Schmidt
"Organizing and Managing Successful Technical Presentations" (Volume 16-4, August, 2000)
Dr. David D. Bradney
"Outcomes Assessment Across Multiple Accreditation Agencies" (Volume 20-4, November 2004)
Dr. Jon M. Duff
"An Outline for the Study of Using Technology"
Dr. Jim Flowers (Volume 15-2, February, 1999)
"A Paradigm for Breadboard Use in Electronics Laboratory Instruction" (Volume 17-2, March, 2001)
Dr. Marc A. Timmerman & Dr. Recayi Pecen
"Preparing to Meet Industry's Demand for Dimensional Metrology Trained Industrial Technologists" (Volume 20-1, November 2003)
Mr. Bruce DeRuntz
"Professional Internships as a Requirement for Graduation" (Volume 15-3, May, 1999)
Dr. John Allen Marshall
"Proposal for Taking the Profession to the Next Level: Assessing Core Knowledge Through Online Methods" (Volume 17-1, November, 2000)
Dr. John W. Sinn
"QFD-based Technical Textbook Evaluation - Procedure and a Case Study" (Volume 18-1, November 2001)
Mr. Jacob Chen and Dr. Joseph C. Chen
"Quality Model in Web-Based Distance Learning: A Case Study" (Volume 22-4, October 2006)
Mr. Terry Bilke, Ms. Jingqing Xia, Mr. Bill D. Bailey, Dr. Suhansa Rodchua and Dr. John Sinn
"Reality-Based Construction Project Management: A Constraint-Based 4D Simulation Environment" (Volume 23-1, January 2007)
Dr. Borinara Park & Dr. Ronald Meier
"A Reading List for Establishing a Base of Knowledge for Technology Management: A Delphi Study" (Volume 19-2, March 2003)
Dr. Jeff McNabb
"Reducing Student Writing Time and Instructor Grading Time of Laboratory Reports" (Volume 22-3, September 2006)
Dr. David Hoffa and Dr. Steven Freeman
"The Relevance of Concurrent Engineering in Industrial Technology Programs" (Volume 16-3, May 2000)
Dr. Rada Balamuralikrishna, Dr. Ragu Athinarayanan & Dr. Xueshu Song
"Service-Learning in an Introductory Course in Construction Management" (Volume 23-2, April 2007)
Dr. Steven W. McCrary, Dr. Dane Paterson & Dr. Shawn Strong
"A Short Preview of Free Statistical Software Packages for Teaching Statistics to Industrial Technology Majors" (Volume 21-2, April 2005)
Ms. Xiaoping Zhu and Dr. Ognjen Kuljaca
"The Status of Industrial Interaction/Outreach in Industrial Technology" (Volume 19-1, December 2002)
Dr. Randall Shaw & Dr. Craig Downing
"A Status Report on the Use of Distance Learning in Industrial Technology" (Volume 17-3, May 2001)
Dr. William W. Clyburn & Dr. W.C. Johnson
"Teaching Geometric Dimensioning and Tolerancing in a Manufacturing Program" (Volume 15-3, May, 1999)
Dr. Vedaraman Sriraman & Dr. John De Leon
"Teaching Kinematic Synthesis of Linkages without Complex Mathematics" (Volume 21-4, October 2005)
Dr. Louis G. Refischneider
"Teaching Lean Manufacturing Concepts through Project-Based Learning and Simulation" (Volume 19-4, August 2003)
Dr. Kenneth W. Stier
"A Technology Systems Course: An Essential Component of General Education Curriculum"
Dr. Ahmad Zargari & Dr. Charles Patrick (Volume 15-1, November, 1998)
"Telecommunication Systems Program Evaluation: A Survey of TCS Alumni on the Curriculum" (Non-Refereed) (Volume 21-3, July 2005)
Dr. H. Naik Dharavath and Dr. Steve Schlough
"Testing a New Approach for Learning Teamwork Knowledge and Skills in Technical Education" (Volume 20-2, March 2004)
Dr. Joseph C. Chen and Dr. Jacob Chen
"Testing a New Curriculum for Design for Manufacturability (DFM) in Technical Education" (Volume 20-4, November 2004)
Dr. Bernie P. Huang, Dr. Jacob Chen & Dr. Joseph C. Chen
"Translating CCAF AAS Degree Programs" (Volume 23-2, June 2007)
Dr. Robert A. Chin
"Trends in Online Education: Case Study at Southwest Missouri State University" (Volume 19-3, May 2003)
Dr. Lesta A. Burgess and Dr. Shawn D. Strong
"Understanding Six Sigma: Implications for Industry and Education" (Volume 20-4, November 2004)
Mr. Sean Goffnett
"An Update on Applied Quality Science at Bowling Green State University and the Instructional Use of Student-Based Applied Research as a Technology Transfer Mechanism: A Critical Element of Education for Technologists"
Mr. Darren Olson & Dr. John Sinn (Volume 15-4, September, 1999)
"Using Peer Assessments in Team Activities" (Volume 20-1, November 2003)
Dr. Steven A. Freeman and Dr. Michael J. Dyrenfurth
"The Web-Enhanced Classroom" (Volume 18-2, February 2002)
Dr. Klaus Schmidt
"Women's Voices are Missing from Technology" (Volume 20-2, March 2004)
Dr. Stephanie Nelson
"A BCS Framework for Air Cargo Terminal Design: Procedure and Case Study" (Volume 22-1, March 2006)
Mr. Chih-Hsien Chen and Dr. Shuo-Yan Chou
"Developing Online Templates for ISO 9000-Based Standard Operating Procedures" (Volume 16-1, January, 2000)
Mr. Anbu Lingappan, Dr. John W. Sinn, Dr. Todd C. Waggoner and Dr. Angelo D. Brown
"Does Rapid Prototyping Improve Student Visualization Skills?" (Volume 16-4, September, 2000)
Dr. Gary Frey & Dr. David Baird
"Digitization and Graphic Communication Education: From Print Reproduction to Dynamic Image Generation"
Ms. Ute Sartorius (Volume 16-2, March, 2000)
"Identification of the Skills Needed by Workers in Various Segments of the Graphic Communications Industry" (Volume 20-3, June 2004)
Dr. H. Naik Dharavath
"The Impact of Visualization Methodology on Spatial Problem Solutions Among High and Low Visual Achievers" (Volume 24-1, January 2008)
Dr. James L. Mohler
"An Integrated Framework for Assembly-Oriented Product Design and Optimization" (Volume 19-2, March 2003)
Dr. Qiang Su and Dr. Shana Shiang-Fong Smith
"Integration of Product and Process Development Using Rapid Prototyping and Workcell Simulation Technologies"
Dr. Daniel Chen and Dr. Frank Cheng (Volume 16-1, November, 1999)
"Integrating the Thinking Process into the Product Design Chain" (Volume 18-2, February 2002)
Mr. Chang Lin Yang, Dr. Tsung Shin Hsu & Dr. Chung Yaw Ching
"A Model Curriculum for Computer Aided Design (CAD) Associate Degree Programs" (Volume 20-2, April 2004)
Dr. Xin-Ran Duan
"Program Evaluation: Utilizing Graduate and Employer Perception Data in Determining Graduates' Job Preparedness Levels" (Volume 24-3, July 2008)
Dr. Bonnie Higgins
"A Rapid Tooling Technique Using a Low Melting Point Alloy for Plastic Injection Molding" (Volume 22-3, July 2006)
Dr. Sudershan Jetley and Mr. Daniel K. Low
"Resolving the Conflict between Design and Manufacturing: Integrated Rapid Prototyping and Rapid Tooling (IRPRT)" (Volume 17-4, August, 2001)
Dr. James E. Folkestad & Dr. Russell L. Johnson
"Selecting Rapid Prototyping Systems" (Volume 18-1, December, 2001)
Dr. Ryan Brown and Dr. Kenneth W. Stier
"Spatial Visualization: Fundamentals and Trends in Engineering Graphics" (Volume 18-1, December, 2001)
Dr. Shawn Strong and Dr. Roger Smith
"Teaching Design for Manufacturability with Desktop Computer-Aided Analysis" (Volume 16-3, May, 2000)
Dr. Louis Reifschneider
"Teaching Kinematic Synthesis of Linkages without Complex Mathematics" (Volume 21-4, October 2005)
Dr. Louis G. Refischneider
"Teaching Printing Industry Guidelines and Process Control: The State of the Profession" (Volume 22-4, October 2006)
Dr. Jerry J. Waite
"Tensile Strength Comparison of Athletic Tapes: Assessed Using ASTM D3759M-96, Standard Test Method for Tensile Strength and Elongation of Pressure-Sensitive Tapes"
Dr. Steven L. Schaeffer, Ms. Jill Slusarski, Ms. Valeria VanTiem, and Dr. M.L. Johnson (Volume 16-1, November, 1999)
"Digitization and Graphic Communication Education: From Print Reproduction to Dynamic Image Generation"
Ms. Ute Sartorius (Volume 16-2, March, 2000)
"Identification of the Skills Needed by Workers in Various Segments of the Graphic Communications Industry" (Volume 20-3, June 2004)
Dr. H. Naik Dharavath
"Importance of Technical Competencies in the Graphic Communications Technology Curriculum as Perceived by the Graphic Communications Industry and Educators" (Volume 19-2, March 2003)
Dr. H. Naik Dharavath
"Teaching Printing Industry Guidelines and Process Control: The State of the Profession" (Volume 22-4, October 2006)
Dr. Jerry J. Waite
"Viewing Distance as a Variable in Discerning Grayscale Halftone Dots at Varying Screen Frequencies" (Volume 22-2, April 2006)
Dr. Jerry J. Waite and Mr. Garth R. Oliver
"Contextualizing Digital Rights Management: Past, Present and Future" (Volume 20-4, November 2004)
Dr. Paul Cesarini
"A Digital Dilemma: File Preparation for Archival Storage" (Volume 22-3, July 2006)
Mr. Frank Wiewandt and Dr. Paul Cesarini
"Digitization and Graphic Communication Education: From Print Reproduction to Dynamic Image Generation"
Ms. Ute Sartorius (Volume 16-2, March, 2000)
"Controlling Robot Through Internet Using Java" (Volume 20-3, June 2004)
Mr. Ravindra Thamma, Dr. Luke H. Huang, Dr. Shi-Jer Lou and Dr. C. Ray Diez
"The Development and Delivery of a Distance Learning (DL) Course in Industrial Technology" (Volume 16-3, June, 2000)
Dr. James E. Smallwood & Dr. Ahmad Zargari
"Distance Education at Bowling Green State University: Challenge, Opportunities and Promise" (Volume 22-4, October 2006)
Dr. Paul Cesarini, Dr. John W. Sinn and Mr. Terence Armentano
"Distance Learning: Issues and Concerns of Distance Learners" (Volume 17-3, May, 2001)
Dr. Edie K. Schmidt & Ms. Ana Gallegos
"An Experimental Study of the Impact of Training on Faculty Concerns" (Volume 21-1, January 2005)
Dr. Rita L. Dobbs
"Linking TQM Culture to Traditional Learning Theories" (Volume 21-4, October 2005)
Dr. George R. Maughan and Ms. Tracey Anderson
"Quality Model in Web-Based Distance Learning: A Case Study" (Volume 22-4, October 2006)
Mr. Terry Bilke, Ms. Jingqing Xia, Mr. Bill D. Bailey, Dr. Suhansa Rodchua and Dr. John Sinn
"Analysis of the Industrial Technology Electrical Systems Specialization Using DACUM" (Volume 15-4, August, 1999)
Dr. Deborah J. Zanella
"Experimental Analysis of a Battery Thermal Management System: Implications and Applications for Industrial and Commercial Products" (Volume 22-2, June 2006)
Dr. John R. Wright, Jr.
"A Hybrid Solar-Wind Power Generation System as an Instructional Resource for Industrial Technology Students" (Volume 16-3, May, 2000)
Dr. Recayi Pecen, Dr. MD Salim & Dr. Marc Timmerman
"Implementation of Multilevel Inverter-Fed Induction Motor Drive" (Volume 24-2, April 2008)
Mr. G. Pandian and Dr. S. Rama Reddy
"Improving Students' Conceptual Understanding of Electrical and Electronics Circuits Via Computer-Based Review Sessions" (Volume 15-2, February, 1999)
Dr. Athula Kulatunga, CEM
"Investigating Electrical Noise Signals in Metal Thin Films with Different Geometry" (Volume 18-2, February 2002)
Dr. Gholam H. Massiha & Mr. Kuldeep S. Rawat
"Journey to a Flexible, Reliable Laboratory Platform for Simultaneous Control of Multiple Reactive Power Devices" (Volume 23-2, June 2007)
Mr. Jason Foster
"A LabView-Based Instrumentation System for a Wind-Solar Hybrid Power Station" (Volume 20-3, July 2004)
Dr. Recayi Pecen, Dr. MD Salim & Mr. Ayhan Zora
"Measuring an Unknown, A Laboratory Problem for Basic Electronics" (Volume 16-1, November, 1999)
Mr. Eric Tisdale
"A Paradigm for Breadboard Use in Electronics Laboratory Instruction" (Volume 17-2, March, 2001)
Dr. Marc A. Timmerman & Dr. Recayi Pecen
"A Study of Magneto-Resistive Read-Write Head Reliability Using Low-Frequency Noise Measurement Technique" (Volume 22-4, October 2006)
Dr. Kuldeep S. Rawat and Dr. Gholam H. Massiha
"The Use of PIC Microcontrollers in Multiple DC Motors Control Applications" (Volume 23-3, July 2007)
Dr. Steve C. Hsiung
"Analysis of the Industrial Technology Electrical Systems Specialization Using DACUM" (Volume 15-4, August, 1999)
Dr. Deborah J. Zanella
"The Application of Artificial Networks to Monitoring and Control of an Induction Hardening Process" (Volume 16-1, January, 2000)
Mr. Timothy Stich, Dr. Julie K. Spoerre and Dr. Tomas Velasco
"Attitude of Electronics Technology Majors at Indiana State University Toward Mathematics"
Dr. William E. Croft (Volume 16-2, March, 2000)
"Electronics Manufacturing Company Hand Assembly Productivity Improvement"
Mr. Bill D. Bailey & Dr. Paul Cheng-Hsin Liu (Volume 15-1, November, 1998)
"Experiment to Determine Feasibility of Electronic Co-op Supervision: BGSU Case Study (Non-Refereed Article)" (Volume 20-1, November 2003)
Dr. John W. Sinn
"Experimental Analysis of a Battery Thermal Management System: Implications and Applications for Industrial and Commercial Products" (Volume 22-2, June 2006)
Dr. John R. Wright, Jr.
"A Hybrid Solar-Wind Power Generation System as an Instructional Resource for Industrial Technology Students" (Volume 16-3, May, 2000)
Dr. Recayi Pecen, Dr. MD Salim & Dr. Marc Timmerman
"Implementation of Multilevel Inverter-Fed Induction Motor Drive" (Volume 24-2, April 2008)
Mr. G. Pandian and Dr. S. Rama Reddy
"Improving Students' Conceptual Understanding of Electrical and Electronics Circuits Via Computer-Based Review Sessions" (Volume 15-2, February, 1999)
Dr. Athula Kulatunga, CEM
"Investigating Electrical Noise Signals in Metal Thin Films with Different Geometry" (Volume 18-2, February 2002)
Dr. Gholam H. Massiha & Mr. Kuldeep S. Rawat
"Journey to a Flexible, Reliable Laboratory Platform for Simultaneous Control of Multiple Reactive Power Devices" (Volume 23-2, June 2007)
Mr. Jason Foster
"A LabView-Based Instrumentation System for a Wind-Solar Hybrid Power Station" (Volume 20-3, July 2004)
Dr. Recayi Pecen, Dr. MD Salim & Mr. Ayhan Zora
"Measuring an Unknown, A Laboratory Problem for Basic Electronics"
Mr. Eric Tisdale (Volume 16-1, November, 1999)
"A National Benchmark Study of Computer Technology-related Programs in Industrial Technology" (Volume 20-4, September 2004)
Dr. Dan Brown, Dr. Rodney L. Custer & Dr. Klaus Schmidt
"A Paradigm for Breadboard Use in Electronics Laboratory Instruction" (Volume 17-2, March, 2001)
Dr. Marc A. Timmerman & Dr. Recayi Pecen
"A Study of Magneto-Resistive Read-Write Head Reliability Using Low-Frequency Noise Measurement Technique" (Volume 22-4, October 2006)
Dr. Kuldeep S. Rawat and Dr. Gholam H. Massiha
"Surface Mount Technology Market Forecasting" (Volume 17-1, December, 2000)
Dr. Shelton Houston
"The Use of PIC Microcontrollers in Multiple DC Motors Control Applications" (Volume 23-3, July 2007)
Dr. Steve C. Hsiung
"Energy and Power Technology: A Perspective for the 21st Century" (Volume 19-4, August 2003)
Dr. Bruce Marsh
"A Hybrid Solar-Wind Power Generation System as an Instructional Resource for Industrial Technology Students" (Volume 16-3, May, 2000)
Dr. Recayi Pecen, Dr. MD Salim & Dr. Marc Timmerman
"Journey to a Flexible, Reliable Laboratory Platform for Simultaneous Control of Multiple Reactive Power Devices" (Volume 23-2, June 2007)
Mr. Jason Foster
"A LabView-Based Instrumentation System for a Wind-Solar Hybrid Power Station" (Volume 20-3, July 2004)
Dr. Recayi Pecen, Dr. MD Salim & Mr. Ayhan Zora
"Passive Solar Lighting Using Fiber Optics" (Volume 19-1, December 2002)
Dr. William Grise & Dr. Charles Patrick
"Applying Quality Engineering Technique to Improve Wastewater Treatment"
Dr. Chau-Chen Torng, Dr. Chao-Yu Chou, & Dr. Hui-Rong Liu (Volume 15-1, November, 1998)
"Energy and Power Technology: A Perspective for the 21st Century" (Volume 19-4, August 2003)
Dr. Bruce Marsh
"A Hybrid Solar-Wind Power Generation System as an Instructional Resource for Industrial Technology Students" (Volume 16-3, May, 2000)
Dr. Recayi Pecen, Dr. MD Salim & Dr. Marc Timmerman
"The Implementation of Recycled Thermostat Composites in Thermoforming Molds" (Volume 19-2, February 2003)
Dr. Dru M. Wilson
"Passive Solar Lighting Using Fiber Optics" (Volume 19-1, December 2002)
Dr. William Grise & Dr. Charles Patrick
"Recycled Foam and Cement Composites in Insulating Concrete Forms" (Volume 18-3, May 2002)
Dr. Richard Boser, Mr. Tory Ragsdale, and Dr. Charles Duvel
"A Relational Study of Wisconsin's Water Quality Operator Certification Program" (Volume 21-1, February 2005)
Mr. Fred S. Rice
"A Study Conducted to Investigate the Feasibility of Recycling Commingled Plastics Fiber in Concrete"
Dr. Kenneth W. Stier & Dr. Gary D. Weede (Volume 15-1, November, 1998)
"A Code of Ethics for Industrial Technology (Non-Refereed Article)" (Volume 20-4, September 2004)
Dr. Larry D. Helsel
"Issues in Information Ethics and Educational Policies for the Coming Age" (Volume 15-4, August, 1999)
Dr. Chien-Pen Chuang & Dr. Joseph C. Chen
"Service-Learning in an Introductory Course in Construction Management" (Volume 23-2, April 2007)
Dr. Steven W. McCrary, Dr. Dane Paterson & Dr. Shawn Strong
"Transforming Leadership in the Manufacturing Industry" (Volume 17-2, April, 2001)
Dr. Jule D. Scarborough
"Integrating Spreadsheet Templates and Data Analysis into Fluid Power Instruction" (Volume 16-4, August, 2000)
Dr. Bruce Marsh
"Analysis of Color Image Difference on the Monitor vs. Printer in a Color Managed Workflow" (Volume 23-4, October 2007)
Dr. H. Naik Dharavath
"Analysis of Newsprint Color Reproduction within the Newspaper Association of America Solid Ink Density and Color Gamut Standards" (Volume 22-4, October 2006)
Dr. H. Naik Dhravath
"Analysis of Print Attributes of Amplitude Modulated (AM) vs. Frequency Modulated (FM) Screening of Multicolor Offset Printing" (Volume 21-3, July 2005)
Dr. H. Naik Dharavath, Dr. Ted M. Bensen and Mr. Bhaskar Gaddam
"Challenges Ahead for Adobe's Portable Document Format" (Volume 21-2, April 2005)
Dr. Paul Cesarini and Mr. Jason Mellen
"Classifying Color Bar Codes to Predict Scanning Success" (Volume 18-3, May 2002)
Dr. Mathias J. Sutton, CSIT
"A Digital Dilemma: File Preparation for Archival Storage" (Volume 22-3, July 2006)
Mr. Frank Wiewandt and Dr. Paul Cesarini
"Digitization and Graphic Communication Education: From Print Reproduction to Dynamic Image Generation"
Ms. Ute Sartorius (Volume 16-2, March, 2000)
"Flexographic Plate Technology: Conventional Solvent Plates versus Digital Solvent Plates" (Volume 24-3, July 2008)
Dr. E. Dean Gilbert and Mr. Frederick Lee
"Graphic Communications Management Program Assessment: A Survey of GCM Alumni on the Curriculum" (Volume 20-3, June 2004)
Dr. Ted Bensen and Dr. H. Naik Dharavath
"Identification of the Skills Needed by Workers in Various Segments of the Graphic Communications Industry" (Volume 20-3, June 2004)
Dr. H. Naik Dharavath
"Impact of Screen-Capture Based Instruction on Student Comprehension of Computer Aided Design (CAD) Software Principles" (Volume 18-1, December, 2001)
Dr. James E. Folkestad & Dr. Michael A. De Miranda
"The Impact of Visualization Methodology on Spatial Problem Solutions Among High and Low Visual Achievers" (Volume 24-1, January 2008)
Dr. James L. Mohler
"Importance of Technical Competencies in the Graphic Communications Technology Curriculum as Perceived by the Graphic Communications Industry and Educators" (Volume 19-2, March 2003)
Dr. H. Naik Dharavath
"An Investigation of the Perceived Financial Performance of Commercial Printing Firms for Conducting B2C Activities Using Web Technology" (Volume 19-2, February 2003)
Dr. Devang Mehta
"A Model Curriculum for Computer Aided Design (CAD) Associate Degree Programs" (Volume 20-2, April 2004)
Dr. Xin-Ran Duan
"A Pilot Study for Integrating Virtual Reality into an Introductory Design and Graphics Course" (Volume 20-4, November 2004)
Dr. Shana S-F Smith & Ms. Shu-Ling Lee
"Program Evaluation: Utilizing Graduate and Employer Perception Data in Determining Graduates' Job Preparedness Levels" (Volume 24-3, July 2008)
Dr. Bonnie Higgins
"Spatial Visualization: Fundamentals and Trends in Engineering Graphics" (Volume 18-1, December, 2001)
Dr. Shawn Strong and Dr. Roger Smith
"A Study of Quality Differences between Waterless and Conventional Litho Printing" (Volume 20-4, November 2004)
Dr. Devang P. Mehta
"Teaching Printing Industry Guidelines and Process Control: The State of the Profession" (Volume 22-4, October 2006)
Dr. Jerry J. Waite
"Viewing Distance as a Variable in Discerning Grayscale Halftone Dots at Varying Screen Frequencies" (Volume 22-2, April 2006)
Dr. Jerry J. Waite and Mr. Garth R. Oliver
"Accreditation Self-Study Management Using a Website Content Management System" (Volume 22-4, December 2006)
Dr. Timothy R. Obermier
"Assessing the Value of Short Term International Experience for Industrial Technology Educators" (Volume 19-4, August 2003)
Mr. Bruce D. DeRuntz
"Assessment of Initial Awareness Knowledge and Sources of Influence Leading to Enrollment Decisions for Students Entering Four-Year Automotive Programs" (Volume 22-4, October 2006)
Dr. Brian A. Sandford, Dr. Robert L. Frisbee and Dr.Gregory G. Belcher
"Attitude of Electronics Technology Majors at Indiana State University Toward Mathematics"
Dr. William E. Croft (Volume 16-2, March, 2000)
"A Comparison of Selected Categories of Accreditation Standards of NAIT, ABET and AACSB" (Volume 18-3, June 2002)
Dr. C. Douglas Ward & Dr. John Dugger
"Computer Knowledge Report from a Student Self-Evaluation" (Volume 20-1, December 2003)
Dr. Charles Duvel and Dr. Sharon Pate
"Computer Management Information Systems and Computer Production Skills Needed by Industrial Technology Graduates as Perceived by Universities and Companies" (Volume 17-1, December, 2000)
Dr. Ivan T. Mosley, Sr.
"A Cross-Disciplinary Biotechnology Initiative: A New Frontier for Industrial Technology (Non-Refereed Article)" (Volume 21-2, April 2005)
Dr. Matthew P. Stephens and Dr. Niaz Latif
"The Development and Delivery of a Distance Learning (DL) Course in Industrial Technology" (Volume 16-3, June, 2000)
Dr. James E. Smallwood & Dr. Ahmad Zargari
"Distance Education at Bowling Green State University: Challenge, Opportunities and Promise" (Volume 22-4, October 2006)
Dr. Paul Cesarini, Dr. John W. Sinn and Mr. Terence Armentano
"Does Rapid Prototyping Improve Student Visualization Skills?" (Volume 16-4, September, 2000)
Dr. Gary Frey & Dr. David Baird
"Effective Assessment: A Model for Industrial Technology Programs" (Volume 19-3, May 2003)
Dr. Shawn D. Strong, Dr. Scott J. Amos and Dr. Neal R. Callahan
"An Examination of the Graduation Rates and Enrollment Trends in Industrial Technology Baccalaureate Programs from 1988-1998" (Volume 17-3, May, 2001)
Dr. Tao C. Chang & Dr. John C. Dugger
"An Experimental Study of the Impact of Training on Faculty Concerns" (Volume 21-1, January 2005)
Dr. Rita L. Dobbs
"Focus on Industry for Success" (Volume 16-3, May, 2000)
Dr. John A. Marshall
"The Future History of Industrial Technology" (Volume 20-1, November 2003)
Dr. Gordon Minty
"Gender Equity in Industrial Technology: The Challenge and Recommendations" (Volume 16-4, September, 2000)
Dr. Balsy Kasi & Dr. John C. Dugger
"Graphic Communications Management Program Assessment: A Survey of GCM Alumni on the Curriculum" (Volume 20-3, June 2004)
Dr. Ted Bensen and Dr. H. Naik Dharavath
"Historical Changes to the NAIT Student Division: An Extreme Makeover (2001-2004)- Non-Refereed Article" (Volume 22-1, January 2006)
Dr. John Wright, Jr. and Dr. Haig Vahradian
"Implementation of Program Assessment in a Technical Department" (Volume 21-2, April 2005)
Dr. Richard Boserand Dr. Kenneth Stier
"The Importance of Student Organizations" (Volume 19-4, August 2003)
Dr. James R. Owens
"Industrial Advisory Committee....or Action Committee?" (Volume 16-3, May, 2000)
Dr. James E. Folkestad & Dr. Michael A. DeMiranda
"Industrial Technology Program Enhancement: The Importance of Strategic Planning" (Volume 21-4, October 2005)
Dr. Dan C. Brown and Dr. Ron Meier
"The Influence of Manufacturing Facility Demographics on Manufacturing Competencies in North Carolina (Non-Refereed Article)" (Volume 20-1, November 2003)
Mr. Richard Temple
"Linking TQM Culture to Traditional Learning Theories" (Volume 21-4, October 2005)
Dr. George R. Maughan and Ms. Tracey Anderson
"Organizing and Managing Successful Technical Presentations" (Volume 16-4, August, 2000)
Dr. David D. Bradney
"Outcomes Assessment Across Multiple Accreditation Agencies" (Volume 20-4, November 2004)
Dr. Jon M. Duff
"Preparing to Meet Industry's Demand for Dimensional Metrology Trained Industrial Technologists" (Volume 20-1, November 2003)
Mr. Bruce DeRuntz
"Program Evaluation: Utilizing Graduate and Employer Perception Data in Determining Graduates' Job Preparedness Levels" (Volume 24-3, July 2008)
Dr. Bonnie Higgins
"Proposal for Taking the Profession to the Next Level: Assessing Core Knowledge Through Online Methods" (Volume 17-1, November, 2000)
Dr. John W. Sinn
"Quality Measurement and Good Practices in Web-Based Distance Learning: A Case Study of the Industrial Management Program at Central Missouri State University" (Volume 20-4, December 2004)
Dr. Ronald Woolsey & Ms. Suhansa Rodchua
"A Reading List for Establishing a Base of Knowledge for Technology Management: A Delphi Study" (Volume 19-2, March 2003)
Dr. Jeff McNabb
"Reducing Student Writing Time and Instructor Grading Time of Laboratory Reports" (Volume 22-3, September 2006)
Dr. David Hoffa and Dr. Steven Freeman
"The Relevance of Concurrent Engineering in Industrial Technology Programs" (Volume 16-3, May, 2000)
Dr. Rada Balamuralikrishna, Dr. Ragu Athinarayanan & Dr. Xueshu Song
"The Role of Scholarship for Industrial Technology Faculty" (Volume 18-1, November, 2001)
Dr. Charles Patrick and Dr. Ahmad Zargari
"The Status of Industrial Interaction/Outreach in Industrial Technology" (Volume 19-1, December 2002)
Dr. Randall Shaw & Dr. Craig Downing
"A Status Report on the Use of Distance Learning in Industrial Technology" (Volume 17-3, May, 2001)
Dr. William W. Clyburn & Dr. W.C. Johnson
"A Technology Systems Course: An Essential Component of General Education Curriculum"
Dr. Ahmad Zargari & Dr. Charles Patrick (Volume 15-1, November, 1998)
"Telecommunication Systems Program Evaluation: A Survey of TCS Alumni on the Curriculum" (Non-Refereed) (Volume 21-3, July 2005)
Dr. H. Naik Dharavath and Dr. Steve Schlough
"Translating CCAF AAS Degree Programs" (Volume 23-2, June 2007)
Dr. Robert A. Chin
"Trends in Online Education: Case Study at Southwest Missouri State University" (Volume 19-3, May 2003)
Dr. Lesta A. Burgess and Dr. Shawn D. Strong
"Understanding Six Sigma: Implications for Industry and Education" (Volume 20-4, November 2004)
Mr. Sean Goffnett
"An Update on Applied Quality Science at Bowling Green State University and the Instructional Use of Student-Based Applied Research as a Technology Transfer Mechanism: A Critical Element of Education for Technologists"
Mr. Darren Olson & Dr. John Sinn (Volume 15-4, September 1999)
"Using Peer Assessments in Team Activities" (Volume 20-1, November 2003)
Dr. Steven A. Freeman and Dr. Michael J. Dyrenfurth
"Using the Internet for an Accreditation Self-Study Portfolio" (Volume 21-1, January 2005)
Dr. Timothy R. Obermier
"The Value of Partnering with Academia (Non-Refereed)" (Volume 22-3, August 2006)
Dr. John R. Wright, Jr. and Mr. Stephen Harris
"What Influences Students to Attend Four-Year Automotive Programs"> (Volume 15-3, June, 1999)
Dr. Robert L. Frisbee & Dr. Greg Belcher
"When the Accreditation Board Says "NO": A Chronicle of the Reaccreditation Process (Non-Refereed Article)" (Volume 20-1, November 2003)
Mr. James L. Toppen
"Women's Voices are Missing from Technology" (Volume 20-2, March 2004)
Dr. Stephanie Nelson
"The Accommodating Workplace: Making Room for Sensory Disabled Employees (Non-Refereed Article)" (Volume 20-1, November 2003)
Mr. Fred S. Rice, Mr. Shoji Nakayama and Mr. David P. Heiser
"Assessing Individual Student Performance in Teams" (Volume 16-3, May, 2000)
Dr. James E. Ettaro
"Downsizing Effects on Organizational Development Capabilities at an Electric Utility"
Mr. Jerry Wagner (Volume 15-1, November, 1998)
"The Impacts of Quality Improvement Training on Fear/Anxiety in Organizations" (Volume 16-4, August, 2000)
Dr. C. Douglas Ward & Dr. John C. Dugger
"The Industrial Front-Line Supervisor and Work Place Laws Related to Civil Rights"
Dr. Michael A. Hayden (Volume 15-1, November, 1998)
"Team Design Problem in Technology" (Volume 21-1, January 2005)
Dr. David S. Kelley
"Team Performance and the Problem-Solving Approach" (Volume 23-4, November 2007)
Dr. Sophia Scott
"Transforming Leadership: An Assessment Tool" (Volume 18-2, February 2002)
Dr. Jule Dee Scarborough
"Unsuitable Job for a Women? Women at Work, Status and Issues"
Dr. M. L. Bostic (Volume 15-1, November, 1998)
"Women's Voices are Missing from Technology" (Volume 20-2, March 2004)
Dr. Stephanie Nelson
"The Linkage of Partnership in American Automotive Industry Supply Chain Management" (Volume 20-3, July 2004)
Dr. Jai W. Hong & Mr. Chao-Wei Cheng
"A Preliminary Study on the State of AutoID" (Volume 24-2, May 2008)
Dr. Kenneth W. Stier
"Supply Chain Management: Strategic Factors From the Buyers' Perspective" (Volume 20-2, March 2004)
Dr. Ronald L. Meier, Dr. Michael R. Williams and Mr. Rodger B. Singley
"Challenges Ahead for Adobe's Portable Document Format" (Volume 21-2, April 2005)
Dr. Paul Cesarini and Mr. Jason Mellen
"Classifying Color Bar Codes to Predict Scanning Success" (Volume 18-3, May 2002)
Dr. Mathias J. Sutton, CSIT
"Computer Knowledge Report from a Student Self-Evaluation" (Volume 20-1, December 2003)
Dr. Charles Duvel and Dr. Sharon Pate
"Contextualizing Digital Rights Management: Past, Present and Future" (Volume 20-4, November 2004)
Dr. Paul Cesarini
"A Digital Dilemma: File Preparation for Archival Storage" (Volume 22-3, July 2006)
Mr. Frank Wiewandt and Dr. Paul Cesarini
"From Critical Success Factors into Criteria for Performance Excellence - An Organizational Change Strategy" (Volume 19-4, August 2003)
Mr. Donald Chrusciel and Dr. Dennis W. Field
"High School Students' Perceptions of Information Technology Skills and Careers" (Volume 16-4, September, 2000)
Dr. Uma A. Gupta & Dr. Lynne E. Houtz
"Implementing IP Services at the Network Edge - Book Review" (Volume 18-3, May 2002)
Mr. David A. Rosenthal, MPA
"Information Technology for Manufacturing: Where Has It Been, Where Is It Heading?" (Volume 16-4, September, 2000)
Mr. Grant W. Lawless
"Integrating Computer and Technology Systems Networks in Industrial Technology Programs (Non-Refereed Article)" (Volume 20-2, March 2004)
Mr. Awa Uma
"A Method for Evaluating Expert System Shells for Classroom Instruction" (Volume 19-1, November 2002)
Dr. MD Salim, Mr. Alvaro Villavicencio, & Dr. Marc A. Timmerman
"A National Benchmark Study of Computer Technology-related Programs in Industrial Technology" (Volume 20-4, September 2004)
Dr. Dan Brown, Dr. Rodney L. Custer & Dr. Klaus Schmidt
"A Preliminary Study on the State of AutoID" (Volume 24-2, May 2008)
Dr. Kenneth W. Stier
"Validation of Project Time Decision-Support Tools and Processes" (Volume 23-2, April 2007)
Dr. Steven W. McCrary, Mr. David Leslie, Dr. Freddy L. Roberts & Dr. Melvin R. Corley
"WebDAV: A Web-Writing Protocol and More" (Volume 20-2, March 2004)
Ms. Mary Ellen O'Shields and Dr. Philip J. Lunsford II
"Who Moved My ERP Solution?" (Volume 19-1, December 2002)
Dr. Matthew P. Stephens & Mr. Hugo X. Ramos
"The Accommodating Workplace: Making Room for Sensory Disabled Employees (Non-Refereed Article)" (Volume 20-1, November 2003)
Mr. Fred S. Rice, Mr. Shoji Nakayama and Mr. David P. Heiser
"Accreditation Self-Study Management Using a Website Content Management System" (Volume 22-4, December 2006)
Dr. Timothy R. Obermier
"Artificial Intelligence and the Internet: An Integral Part of the Factory of the Future" (Volume 18-2, February 2002)
Ms. Marla P. Rogers
"Challenges Ahead for Adobe's Portable Document Format" (Volume 21-2, April 2005)
Dr. Paul Cesarini and Mr. Jason Mellen
"Computer Crimes: How to Avoid Falling Victim" (Volume 15-3, May, 1999)
Dr. John A. Marshall
"Contextualizing Digital Rights Management: Past, Present and Future" (Volume 20-4, November 2004)
Dr. Paul Cesarini
"Controlling Robot Through Internet Using Java" (Volume 20-3, June 2004)
Mr. Ravindra Thamma, Dr. Luke H. Huang, Dr. Shi-Jer Lou and Dr. C. Ray Diez
"The Development and Delivery of a Distance Learning (DL) Course in Industrial Technology" (Volume 16-3, June, 2000)
Dr. James E. Smallwood & Dr. Ahmad Zargari
"Digitization and Graphic Communication Education: From Print Reproduction to Dynamic Image Generation"
Ms. Ute Sartorius (Volume 16-2, March, 2000)
"Distance Education at Bowling Green State University: Challenge, Opportunities and Promise" (Volume 22-4, October 2006)
Dr. Paul Cesarini, Dr. John W. Sinn and Mr. Terence Armentano
"Distance Learning: Issues and Concerns of Distance Learners" (Volume 17-3, May, 2001)
Dr. Edie K. Schmidt & Ms. Ana Gallegos
"Electronic Commerce: An Introduction (Book Review)" (Volume 17-1, December, 2000)
Dr. Fahad A. Alyabis
"Enhancing a Residential Safety Course with the Development of an Online Component: A Limited Case Study" (Volume 16-4, September, 2000)
Dr. Steven A. Freeman & Dr. Karla M. Embleton
"Experiment to Determine Feasibility of Electronic Co-op Supervision: BGSU Case Study (Non-Refereed Article)" (Volume 20-1, November 2003)
Dr. John W. Sinn
"Impact of Screen-Capture Based Instruction on Student Comprehension of Computer Aided Design (CAD) Software Principles" (Volume 18-1, December, 2001)
Dr. James E. Folkestad & Dr. Michael A. De Miranda
"Implementing IP Services at the Network Edge - Book Review" (Volume 18-3, May 2002)
Mr. David A. Rosenthal, MPA
"An Industrial Technologist's Core Knowledge: Web-based Strategy for Defining our Discipline" (Volume 17-2, February, 2001)
Dr. John W. Sinn & Mr. Darren Olson
"Internet and Network Security" (Volume 17-1, November, 2000)
Dr. James H. Yu & Mr. Tom K. Le
"Internet Crimes Encountered By Novice Surfers"
Dr. John A. Marshall (Volume 15-2, February, 1999)
"Internet Service Providers: A Method for Selection" (Volume 15-4, August, 1999)
Dr. John A. Marshall
"An Investigation of the Perceived Financial Performance of Commercial Printing Firms for Conducting B2C Activities Using Web Technology" (Volume 19-2, February 2003)
Dr. Devang Mehta
"Quality Measurement and Good Practices in Web-Based Distance Learning: A Case Study of the Industrial Management Program at Central Missouri State University" (Volume 20-4, December 2004)
Dr. Ronald Woolsey & Ms. Suhansa Rodchua
"A Status Report on the Use of Distance Learning in Industrial Technology" (Volume 17-3, May, 2001)
Dr. William W. Clyburn & Dr. W.C. Johnson
"Staying Competitive: Links to Manufacturing Technology Networks" (Volume 15-4, August, 1999)
Dr. H. Fred Walker, CQE, CSIT, Dr. Teresa J.K. Hall, CMfgE & Dr. Loren Faeth, CQE, CMfgT, GECJ
"Trends in Online Education: Case Study at Southwest Missouri State University" (Volume 19-3, May 2003)
Dr. Lesta A. Burgess and Dr. Shawn D. Strong
"Understanding E-Mail Delivery" (Volume 17-1, November, 2000)
Dr. John A. Marshall
"Using the Internet for an Accreditation Self-Study Portfolio" (Volume 21-1, January 2005)
Dr. Timothy R. Obermier
"Web-Centric Product Data Management" (Volume 18-1, November, 2001)
Dr. David S. Kelly
"WebDAV: A Web-Writing Protocol and More" (Volume 20-2, March 2004)
Ms. Mary Ellen O'Shields and Dr. Philip J. Lunsford II
"The Web-Enhanced Classroom" (Volume 18-2, February 2002)
Dr. Klaus Schmidt
"Who Moved My ERP Solution?" (Volume 19-1, December 2002)
Dr. Matthew P. Stephens & Mr. Hugo X. Ramos
"Accreditation Self-Study Management Using a Website Content Management System" (Volume 22-4, December 2006)
Dr. Timothy R. Obermier
"Assessing the Professional Development Needs of NAIT's Industry Division Members" (Volume 20-2, March 2004)
Mr. Bruce DeRuntz and Dr. Ronald Meier
"A Code of Ethics for Industrial Technology (Non-Refereed Article)" (Volume 20-4, September 2004)
Dr. Larry D. Helsel
"Contextualizing Digital Rights Management: Past, Present and Future" (Volume 20-4, November 2004)
Dr. Paul Cesarini
"An Exploratory Study to Assess Competency Gaps in Science, Mathematics, Engineering, and Technological (SMET) Education"
Dr. Ronald Meier, Dr. Michael Williams, Dr. Michael Humphreys, & Mr. John Centko (Volume 15-3, June, 1999)
"A Framework for Implementing Appropriate Manufacturing Systems in Developing Economies"
Dr. Samuel C. Obi (Volume 15-2, February, 1999)
"From Critical Success Factors into Criteria for Performance Excellence - An Organizational Change Strategy" (Volume 19-4, August 2003)
Mr. Donald Chrusciel and Dr. Dennis W. Field
"The Future History of Industrial Technology" (Volume 20-1, November 2003)
Dr. Gordon Minty
"Gender Equity in Industrial Technology: The Challenge and Recommendations" (Volume 16-4, September, 2000)
Dr. Balsy Kasi & Dr. John C. Dugger
"Industrial Advisory Committee....or Action Committee?" (Volume 16-3, May, 2000)
Dr. James E. Folkestad & Dr. Michael A. DeMiranda
"Industrial Technology Program Enhancement: The Importance of Strategic Planning" (Volume 21-4, October 2005)
Dr. Dan C. Brown and Dr. Ron Meier
"Information Technology for Manufacturing: Where Has It Been, Where Is It Heading?" (Volume 16-4, September, 2000)
Mr. Grant W. Lawless
"Key Characteristics of Industrial Technology Faculty: A National Survey of NAIT Accredited IT Programs"
Dr. Ahmad Zargari, CSIT & Dr. Charles E. Coddington (Volume 15-2, March 1999)
"Maximizing Your Industrial Advisory Potential"
Dr. John Allen Marshall (Volume 15-2, March 1999)
"NAIT Demographics Study - 1997"
Dr. Athula Kulatunga, Dr. Randall Shaw & Dr. Mark Nelson (Volume 15-2, March 1999)
"Proposal for Taking the Profession to the Next Level: Assessing Core Knowledge Through Online Methods" (Volume 17-1, November 2000)
Dr. John W. Sinn
"A Statistical Comparison of Three Root Cause Analysis Tools" (Volume 20-2, February 2004)
Dr. Anthony Mark Doggett
"The Status of Industrial Interaction/Outreach in Industrial Technology" (Volume 19-1, December 2002)
Dr. Randall Shaw & Dr. Craig Downing
"The Status of NAIT: Perceptions of Industrial Technology Department Chairs" (Volume 16-3, May 2000)
Dr. Mark R. Miller
"Transforming Leadership in the Manufacturing Industry" (Volume 17-2, April, 2001)
Dr. Jule D. Scarborough
"Transforming Leadership: An Assessment Tool" (Volume 18-2, February 2002)
Dr. Jule Dee Scarborough
"Understanding Six Sigma: Implications for Industry and Education" (Volume 20-4, November 2004)
Mr. Sean Goffnett
"Using the Internet for an Accreditation Self-Study Portfolio" (Volume 21-1, January 2005)
Dr. Timothy R. Obermier
"When the Accreditation Board Says "NO": A Chronicle of the Reaccreditation Process (Non-Refereed Article)" (Volume 20-1, November 2003)
Mr. James L. Toppen
"Women's Voices are Missing from Technology" (Volume 20-2, March 2004)
Dr. Stephanie Nelson
"Gauge R&R: An Effective Methodology for Determining the Adequacy of a New Measurement System for Micron-level Metrology" (Volume 23-4, October 2007)
Dr. David W. Hoffa and Dr. Chad Laux
"The House of Competitiveness: The Marriage of Agile Manufacturing, Design for Six Sigma, and Lean Manufacturing with Quality Considerations" (Volume 21-3, July 2005)
Ms. Jami Kovach, Ms. Paris Stringfellow, Ms. Jennifer Turner and Dr. B. Rae Cho
"The Accommodating Workplace: Making Room for Sensory Disabled Employees (Non-Refereed Article)" (Volume 20-1, November 2003)
Mr. Fred S. Rice, Mr. Shoji Nakayama and Mr. David P. Heiser
"Computer Crimes: How to Avoid Falling Victim" (Volume 15-3, May, 1999)
Dr. John A. Marshall
"Contextualizing Digital Rights Management: Past, Present and Future" (Volume 20-4, November 2004)
Dr. Paul Cesarini
"Integrating Enterprise-Wide Risk Management Concepts into Industrial Technology Curricula" (Volume 16-4, September, 2000)
Dr. Ronald L. Meier
"Internet and Network Security" (Volume 17-1, November, 2000)
Dr. James H. Yu & Mr. Tom K. Le
"Internet Crimes Encountered By Novice Surfers"
Dr. John A. Marshall (Volume 15-2, February, 1999)
"Issues in Information Ethics and Educational Policies for the Coming Age" (Volume 15-4, August, 1999)
Dr. Chien-Pen Chuang & Dr. Joseph C. Chen
"The Industrial Front-Line Supervisor and Work Place Laws Related to Civil Rights"
Dr. Michael A. Hayden (Volume 15-1, November, 1998)
"A Progress Report on Y2K"
Dr. Kenneth W. Hollman, Dr. Emily J. Norman Zietz & Dr. Robert G. Colvard (Volume 15-2, March, 1999)
"Implementation of Multilevel Inverter-Fed Induction Motor Drive" (Volume 24-2, April 2008)
Mr. G. Pandian and Dr. S. Rama Reddy
"A Systematic Approach for Identifying Optimum Surface Roughness Performance in End-Milling Operations" (Volume 17-2, March 2001)
Dr. John L. Yang & Dr. Joseph C. Chen
"Teaching Kinematic Synthesis of Linkages without Complex Mathematics" (Volume 21-4, October 2005)
Dr. Louis G. Refischneider
"Technology and Practice in a Historical Context: Building the Civil War Submarine 'Pioneer' (Non-Refereed Article)" (Volume 21-1, January 2005)
Dr. Roy Bonnette
"Analysis of an Effective Sensing Location for an In-process Surface Recognition System in Turning Operations" (Volume 15-3, May, 1999)
Dr. Joseph C. Chen, Mr. Luke H. Huang, Ms. Ashley X. Lan, & Mr. Samson Lee
"Characterizing Productivity of a 4kW CO2 Laser Cutting System for 0.25" Mild Steel Using Central Composite Methodology" (Volume 22-2, June 2006)
Mr. Michael L. Cadorette and Dr. H. Fred Walker
"Determining Process Mean for Machining While Unbalanced Tolerance Design Occurs (Volume 17-1, November, 2000)
Dr. Ming-Hsien Caleb Li & Dr. Joseph C. Chen
"Development of an Accelerometer-Based Surface Roughness Prediction System in Turning Operations Using Multiple Regression Techniques" (Volume 20-4, November 2004)
Mr. E. Daniel Kirby, Ms. Zhe Zhang & Dr. Joseph C. Chen
"Effect of Tool/Chip Contact Length on Orthogonal Turning Performance"
Mr. Luke H. Huang, Dr. Joseph C. Chen & Dr. Tao Chang (Volume 15-2, March, 1999)
"Effects of Tool Diameter Variations in On-Line Surface Roughness Recognition System"
Dr. Mandara D. Savage & Dr. Joseph C. Chen (Volume 15-4, September, 1999)
"A Multiple Regression Model to Predict In-process Surface Roughness in Turning Operation Via Accelerometer" (Volume 17-2, February, 2001)
Mr. Luke Huang & Dr. Joseph C. Chen
"Neural Network-Based Tool Breakage Monitoring System for End Milling Operations" (Volume 16-2, March, 2000)
Mr. Po-Tsang Huang & Dr. Joseph C. Chen
"Plunge Cut Grinding Simplified: An Illustrative Student Experiment" (Volume 22-3, July 2006)
Dr. John Edward Wyatt and Dr. George J. Treml
"Service-Learning in an Introductory Course in Construction Management" (Volume 23-2, April 2007)
Dr. Steven W. McCrary, Dr. Dane Paterson & Dr. Shawn Strong
"A Statistical Approach in Detecting Tool Breakage in End Milling Operations"
Mr. Po-Tsang Huang, Dr. Joseph C. Chen, & Dr. Chai-Yu Chou (Volume 15-3, June, 1999)
"A Systematic Approach for Identifying Optimum Surface Roughness Performance in End-Milling Operations" (Volume 17-2, March, 2001)
Dr. John L. Yang & Dr. Joseph C. Chen
"The Accommodating Workplace: Making Room for Sensory Disabled Employees (Non-Refereed Article)" (Volume 20-1, November 2003)
Mr. Fred S. Rice, Mr. Shoji Nakayama and Mr. David P. Heiser
"Artificial Intelligence and the Internet: An Integral Part of the Factory of the Future" (Volume 18-2, February 2002)
Ms. Marla P. Rogers
"A BCS Framework for Air Cargo Terminal Design: Procedure and Case Study" (Volume 22-1, March 2006)
Mr. Chih-Hsien Chen and Dr. Shuo-Yan Chou
"Challenges Facing U.S. Manufacturing and Strategies (Non-Refereed)" (Volume 23-2, April 2007)
Dr. Ji Yao Shen, Dr. Derrek Dunn & Mr. Yun Shen
"Comparative Analysis between Manufacturing and Construction Enterprises on the Use of Formalized Quality Programs" (Volume 22-3, September 2006)
Dr. Steven W. McCrary, Mr. Rathel R. Smith and Dr. R. Neal Callahan
"Competencies Identified as Important for 21st Century Plastering Contractors - A Rotational Delphi"
Dr. Joseph Scarcella & Dr. Rodney L. Custer (Volume 15-1, November, 1998)
"A Consolidated Approach to Productivity Assessment" (Volume 18-2, March 2002)
Dr. Bruce Marsh
"Cost Justification of Capital Equipment Using 'Economic Value Added' Analysis"
Dr. H. Fred Walker, CQE, CQA, CSIT (Volume 15-2, February, 1999)
"Downsizing Effects on Organizational Development Capabilities at an Electric Utility"
Mr. Jerry Wagner (Volume 15-1, November, 1998)
"The Effect of Rest Periods on Hand Fatigue and Productivity" (Volume 22-3, August 2006)
Dr. Mandara Savage and Mr. Darren Pipkins
"ERP: The Primary Solution Provider for Industrial Companies" (Volume 17-3, May, 2001)
Dr. Ali E. Kashef, Dr. Mahyar Izadi & Dr. Saud H. Al-Sehali
"An Exploratory Study to Assess Competency Gaps in Science, Mathematics, Engineering, and Technological (SMET) Education"
Dr. Ronald Meier, Dr. Michael Williams, Dr. Michael Humphreys, & Mr. John Centko (Volume 15-3, June, 1999)
"An Exploratory Study to Identify a Common Managerial/Professional Core Curriculum for NAIT Baccalaureate Programs" (Volume 24-2, May 2008)
Dr. Ron Meier and Dr. Dan Brown
"Factors and Measures of Quality Costs Program in the Manufacturing Environment" (Volume 22-4, October 2006)
Dr. Suhansa Rodchua
"Focus on Industry for Success" (Volume 16-3, May, 2000)
Dr. John A. Marshall
"From Critical Success Factors into Criteria for Performance Excellence - An Organizational Change Strategy" (Volume 19-4, August 2003)
Mr. Donald Chrusciel and Dr. Dennis W. Field
"Gender Equity in Industrial Technology: The Challenge and Recommendations" (Volume 16-4, September 2000)
Dr. Balsy Kasi & Dr. John C. Dugger
"The House of Competitiveness: The Marriage of Agile Manufacturing, Design for Six Sigma, and Lean Manufacturing with Quality Considerations" (Volume 21-3, July 2005)
Ms. Jami Kovach, Ms. Paris Stringfellow, Ms. Jennifer Turner and Dr. B. Rae Cho
"The Impact of ISO 9000 Certification on Quality Management Practices in Thailand" (Volume 21-1, January 2005)
Dr. Jai W. Hong and Mr. Satit Phitayawejwiwat
"The Industrial Front-Line Supervisor and Work Place Laws Related to Civil Rights"
Dr. Michael A. Hayden (Volume 15-1, November 1998)
"Industrial Technology Program Enhancement: The Importance of Strategic Planning" (Volume 21-4, October 2005)
Dr. Dan C. Brown and Dr. Ron Meier
"The Impacts of Quality Improvement Training on Fear/Anxiety in Organizations" (Volume 16-4, August 2000)
Dr. C. Douglas Ward & Dr. John C. Dugger
"The Importance of TQM Concepts and Instruction as Perceived by Industrial and Vocational Training Personnel"
Dr. Hsi-Kong Chin Wang and Dr. William G. Miller (Volume 16-1, November 1999)
"Information Technology for Manufacturing: Where Has It Been, Where Is It Heading?" (Volume 16-4, September 2000)
Mr. Grant W. Lawless
"An Integrated Framework for Assembly-Oriented Product Design and Optimization" (Volume 19-2, March 2003)
Dr. Qiang Su and Dr. Shana Shiang-Fong Smith
"Integrating Enterprise-Wide Risk Management Concepts into Industrial Technology Curricula" (Volume 16-4, September, 2000)
Dr. Ronald L. Meier
"Integrating the Thinking Process into the Product Design Chain" (Volume 18-2, February 2002)
Mr. Chang Lin Yang, Dr. Tsung Shin Hsu & Dr. Chung Yaw Ching